Adex Technical has been the UK distributor of Kendeil aluminium electrolytic capacitors since 1996. Screw terminal electrolytic capacitors and snap in electrolytic capacitors are manufactured at their plant in Milan. Kendeil products have proven reliability, are very competitively priced and are available on shorter delivery times than well known brands.
| K01: | Screw terminal electrolytic, 85 deg.C, up to 12,000uF at 450Vdc and 4,700uF at 500Vdc |
| K02: | Screw terminal electrolytic, 105 deg.C, up to 4,700uF at 450Vdc, high ripple current |
| K05: | Snap in electrolytic, 105 deg.C, up to 1,000uF, 450Vdc. |
Applications: Inverters, power supplies from switched mode to uninterruptible power supplies for applications in industrial controls, drives, telecommunications, battery chargers, emergency lighting, welding, offshore oil and audio.
NessCap is a world leader in ultracapacitor or supercapacitor technology. NessCap offer 2 types of ultracapacitor: Electric Double Layer Capacitor (EDLC) and Pseudocapacitor.
Ultracapacitors are rechargeable energy storage devices which replace or support batteries, due to their vastly superior power capability, rapid charging/discharging performance, wide operating temperature range, in addition to low maintenance and long life. The ultracapacitor is now being used in consumer, industrial, transportation and military sectors and new applications are constantly emerging.
EDLC: Low cost activated carbon powder material, high power, long life
| Single cells (7 types): | 2.5Vdc and 2.7Vdc, 3F - 5000F |
| Module cells (5 types): | 4.6Vdc - 340Vdc, 1.5F - 238F |
PSEUDOCAPACITOR: Metal oxide based proprietary material, high energy, low cost
A Pseudocapacitor has an energy density which is up to 80% higher than an EDLC.
Single cells (1 type): 2.3V, 20F - 300F
Applications: Used instead of, or in conjunction with batteries in applications involving no maintenance, peak pulse power, quick charge, memory backup, electric vehicles and solar products.
Metallised polypropylene or polyester film capacitors from ICW encompass designs from 10nF to 100uF and 63Vdc to 1500Vdc.
| FP/ SMF/COAX: | Polypropylene, 10uF - 400uF, 160Vdc - 1500Vdc rated |
| Polyester, 5uF - 500uF, 63Vdc- 630Vdc rated |
Constructed without cans, these types are designed for power electronic applications where low loss, low inductance, good volumetric efficiency and easy mounting are the key features.
| PCP: | Polypropylene 5uF - 300uF, 160Vdc - 700Vdc |
| PCT: | Polyester 5uF - 500uF, 63Vdc - 700Vdc |
These types are housed in aluminium cans with screw terminals or flying leads for applications where low loss, flexibility of design and easy mounting are key features.
Applications: High frequency filtering, energy storage and inverter circuits.
Standard axial types AX, AP, PW in polypropylene and TW in polyester are also available.
Fairfild, based in Milan, manufacture 25 ranges of power resistors which cover the following types:
Metal case resistors: 50W - 2000W
Short circuit and protection resistors: 350W - 600W
Ribbon wound resistors: 800W - 1200W
Wirewound resistors: 300W - 5000W
Box resistors: IP20, IP23, 700W - 24kW
Vitreous enameled/cemented wirewound resistors: 10W - 1500W
Oxidated wire wound resistors: 190W - 800W
Ceramic case wire wound resistors: 4W - 20W
Applications: Braking resistance in inverters and drives, capacitor charge/discharge, filters, protection resistance, load resistance.
Adex Technical Ltd
Unit 20E
Merretts Mill Ind. Estate
Woodchester
Stroud
Glos. GL5 5EX
T: (0)1453 834410
F: (0)1453 835515
E: sales@adexltd.co.uk